AZDEN FMX-42a 4-Channel Microphone Field Mixer 10 Pin Camera Return-AC power adt

Description

AZDEN FMX-42a 4-Channel Microphone Field Mixer 10 Pin Camera Return-AC power adt. Condition is "Used"
This mixer is awesome. Very reliable and portable. Uses (6) AA batteries. I will include the AC power adapter plus the NP1 battery cup. This cup unit attaches to the FMX-42a via the Hirose plug. This option allows many hours of use with an NP1 type battery. Here are some specs.Azden FMX-42a Specs
Input
Balanced Input4 x XLR 3-pin female (CH 1, 2, 3 & 4)
LevelLine-
Standard: +4 dBu (electronically balanced)
Maximum: > +26 dBu
Impedance: 20 kOhms
MIC HI-
Standard: -38 dBu (electronically balanced)
Maximum: +4 dBu
Impedance: 2 kOhms
MIC LO-
Standard: -58 dBu (electronically balanced)
Maximum: -15 dBu
Impedance: 2 kOhms
High Pass Filter100 Hz - 6 dB/oct
Input Level-20 to +19 dBu (unbalanced)
Impedance11 kOhms
Return InputHirose 10-pin female for Hirose plug part #RM15TD-10P
1/8" / 3.5 mm stereo mini-jack
Input level: -20 to +19 dBu (unbalanced)
Impedance: 11 kOhms
Output
Balanced Output2 x XLR 3-pin male (output L & R)
Unbalanced Outputs1/8" / 3.5 mm stereo mini-jack
Monitor Output1/4" / 6.3 mm stereo jack
Balanced Output LevelLINE-
Standard: +4 dBu (electronically balanced, greater than 10 kOhms load)
Maximum: +20 dBu (electronically balanced, greater than 10 kOhms load)
Impedance: 600 ohms
MIC-
Standard: -36 dBu (electronically balanced, greater than 10 kOhms load)
Maximum: -20 dBu (electronically balanced, greater than 10 kOhms load)
Impedance: 600 ohms
Unbalanced Output LevelStandard: -36 dBu (electronically balanced, 10 kOhms load)
Maximum: -20 dBu (electronically balanced, 10 kOhms load)
Impedance: 120 ohms
Monitor OutputMax Output: +1 dBu (32 Ohm load at 9 V), 16 - 100 Ohm load recommended
MetersStandard Output Level: 0 VU (+4 dBu)
Digital OutputNo
General
Frequency ResponseBalanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB)
Monitor Output: 30 Hz - 30 kHz (+0/-2 dB)
Signal-to-Noise RatioBalanced Output: -120 dBu (A weighted, input equivalent level)
THDBalanced Output: < 0.005% @ 1 kHz (at LINE position +19 dBu output)
Phantom Power48 V (±1.5 V)
Sample Frequency1 kHz
Battery Requirement6 x alkaline AA
Current Drain164 mA (Meter Illum & Phantom OFF @ 9 V)
192 mA (Meter Illum OFF, Phantom ON w/1 MIC @ 9 V)
125 mA (Meter Illum & Phantom OFF @ 15 V)
External Power10.5 ~ 17 VDC @ 200 mA
Dimensions9.0 x 6.5 x 2.3" / 220 x 160 x 56 mm (without protrusions)
Weight3.0 lb / 1.35 kg (without batteries)
Azden FMX-42a
Specs
Input
Balanced Input
4 x XLR 3-pin female (CH 1, 2, 3 & 4)
Level
Line-
Standard: +4 dBu (electronically balanced)
Maximum: > +26 dBu
Impedance: 20 kOhms
MIC HI-
Standard: -38 dBu (electronically balanced)
Maximum: +4 dBu
Impedance: 2 kOhms
MIC LO-
Standard: -58 dBu (electronically balanced)
Maximum: -15 dBu
Impedance: 2 kOhms
High Pass Filter
100 Hz - 6 dB/oct
Input Level
-20 to +19 dBu (unbalanced)
Impedance
11 kOhms
Return Input
Hirose 10-pin female for Hirose plug part #RM15TD-10P
1/8" / 3.5 mm stereo mini-jack
Input level: -20 to +19 dBu (unbalanced)
Impedance: 11 kOhms
Output
Balanced Output
2 x XLR 3-pin male (output L & R)
Unbalanced Outputs
1/8" / 3.5 mm stereo mini-jack
Monitor Output
1/4" / 6.3 mm stereo jack
Balanced Output Level
LINE-
Standard: +4 dBu (electronically balanced, greater than 10 kOhms load)
Maximum: +20 dBu (electronically balanced, greater than 10 kOhms load)
Impedance: 600 ohms
MIC-
Standard: -36 dBu (electronically balanced, greater than 10 kOhms load)
Maximum: -20 dBu (electronically balanced, greater than 10 kOhms load)
Impedance: 600 ohms
Unbalanced Output Level
Standard: -36 dBu (electronically balanced, 10 kOhms load)
Maximum: -20 dBu (electronically balanced, 10 kOhms load)
Impedance: 120 ohms
Monitor Output
Max Output: +1 dBu (32 Ohm load at 9 V), 16 - 100 Ohm load recommended
Meters
Standard Output Level: 0 VU (+4 dBu)
Digital Output
No
General
Frequency Response
Balanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB)
Monitor Output: 30 Hz - 30 kHz (+0/-2 dB)
Signal-to-Noise Ratio
Balanced Output: -120 dBu (A weighted, input equivalent level)
THD
Balanced Output: < 0.005% @ 1 kHz (at LINE position +19 dBu output)
Phantom Power
48 V (±1.5 V)
Sample Frequency
1 kHz
Battery Requirement
6 x alkaline AA
Current Drain
164 mA (Meter Illum & Phantom OFF @ 9 V)
192 mA (Meter Illum OFF, Phantom ON w/1 MIC @ 9 V)
125 mA (Meter Illum & Phantom OFF @ 15 V)
External Power
10.5 ~ 17 VDC @ 200 mA
Dimensions
9.0 x 6.5 x 2.3" / 220 x 160 x 56 mm (without protrusions)
Weight
3.0 lb / 1.35 kg (without batteries)