SR-PAX2 Two-Channel Active Audio Mixer- XLR + 3.5mm inputs - For Video Cameras

Description

SR-PAX2 Two-Channel Active Audio Mixer- XLR + 3.5mm inputs - For Video Cameras.
Mount this audio interface between your tripod and your camera and connect your microphone(s) directly to your camera's audio input.
Capture high-quality audio from condenser shotgun microphone through XLR or 3.5mm mono or stereo connectors. LCD meter reads audio level. Battery-operated (9V battery included). See pix of actual unit + stock images of unit w. camera.
Unit is in very good condition - used indoors in home studio using a Rode videomic pro and a Sony mirrorless camera.. Can't speak to the Phantom power feature as my mic has its own power.
Bought new for 0.
Sold As-Is.
KEY FEATURES
Two 1/8″ (3.5 mm) mono inputs   One stereo input
Two XLR Inputs
One 1/8 (3.5 mm) stereo output
Mono/Stereo switch (M/S)
Left and Right Channel Control Knobs
Independent phantom power control for inputs. INPUT 1: 5V/OFF/3V; INPUT 2: 48V/OFF
LINE/MIC/PH switch
Level Meter Indicates the sound level in dB for each channel
Headphone jack to monitor the audio from microphones
SPECS
Frequency Response:
20 Hz to 20 Khz, +/-0.5 dB
THD:
Less than 0.01% @ 1 kHz, -30 dBu input
SNR:
80 dB @ 1 kHz, -30 dBu input
INPUT1 GAIN:
LINE:
0 dB
MIC/PH:
20dB
INPUT2 GAIN
LINE:
0 dB
MIC/PH:
20dB
INPUT 1 Phantom Power:
5V/3V power supplies
INPUT 2 Phantom Power:
48V power supplies
Level Meter:-
18 dB to +3 dB in 3 dB increments
Power Requirements:
9 V alkaline or lithium battery
Battery Duration:
5 hours typical lithium battery (no phantom)
3 hour typical lithium battery (with phantom)
Dimensions:
(L x W x H) 136 mm x 80.5 mm x 62.5 mm
Weight:
13.5 oz (0.385 kg)