Tactical Fiber Systems CCRT242 TFS ClearCom Interface for ATEM Studio 2_Great

Description

Enables communication with your camera crew on both fiber and wired ClearCom party line systems using a single headset. We used this in our studio for a brief time while using BlackMagic Designs ATEM 2 Converter. It did the job to expand our ClearCom System by using the optical cables to each camera package. You will receive the adapter and breakout cable pictured. Retails at 00.
Tactical Fiber Systems CCRT242
Overview
The
CCRT242 TFS ClearCom Interface
from
Tactical Fiber Systems
links the Blackmagic-Design ATEM Studio Converter 2 or a single camera converter system to a wired ClearCom party line system. It includes a patch cable with a 9-pin connector at one end, and one 1/4" plug and one 0.20" plug on the other. The cable connects to the headset / microphone inputs of either a studio converter (when used with multi-fiber links) or a camera converter (when used with single fiber links). A standard 3-pin XLR cable connects it to any standard ClearCom 3-pin XLR Base Station or Belt-Pak connector. It is powered by the ClearCom connection and does not require additional external power.
Note:
To null the interface, plug ear set into the 1/8" jack to the right of the interface and adjust the RLC trim pots for minimum noise. Then unplug the ear set. You must unplug the ear set after nulling the interface before using it.
Tactical Fiber Systems CCRT242
Specs
Compatibility
ATEM Studio 2
Connectors
1 x 1/8" phone jack female, ear set connector
1 x 3-pin XLR, ClearCom connector
1 x 9-pin connector, interface
Cable Connector A
1 x 9-pin connector
Cable Connector B
1 x 1/4" phone jack
1 x 0.2" phone jack
Dimensions
6 x 4 x 2" (15.2 x 10.2 x 5.1 cm)
Weight
1 lb (0.45 kg)