Wohler AMP2-E8MDA-3G 8-Channel Dolby Audio Monitor

Description

Wohler AMP2-E8MDA-3G 8-Channel Dolby Audio Monitor
Inputs
4 x Unbalanced AES/PCM Pairs (BNC)
4 x AES Balanced Pairs (1 DB-25)
2 x Dolby E/AC-3 (BNC)
2 x 3G/HD/SD-SDI (BNC)
8 x Analog Channels (1 DB-25)
Outputs
1 x Reclocked 3G/HD/SD-SDI (BNC)
4 x Balanced AES Pairs Loop Out (DB-25)
4 x Unbalanced AES Pairs (1 HD-15) / Option for Balanced AES (DB-25) Converted from SDI
5 x Decoded Dolby E/AC-3 (BNC)
1 x Unbalanced AES Pair Mix Out of Dolby Source
8 x Metered Analog Channels (1 DB-25)
2 x Selected Downmix Analog (2 XLR)
Other Rear Panel Connectors
3 x RS-232 (DB-9)
4 x 10-Position Recessed Rotary Pots
1 x 2-Position switch (for RS-232C)
Peak Acoustic Output at 2 feet
104dB SPL
Level Meters
8 x 53-Segment
Level Meter Scale
0 to -66dB
Level Meter Threshold
0/+4/+6/+8 dBv (Switch Selectable)
Level Meter Dynamics
Simultaneous VU & PPM (AES)
Level Meter Resolution
1.0dB
Magnetic Shielding
<0.8 gauss any adjacent surface
Hum & Noise
Better than -68dB below full output
Electrical Distortion
<0.15% @ any level below limit threshold
Acoustic Distortion
Frequencies Above 140 Hz (Including Cabinet Resonance): Typically <1.5% (6% or less worst case)
Frequency Response 1/6 Octave
80Hz - 16kHz (±5dB) / -10dB @ 40Hz, 20kHz
Analog Input Impedance
>40 kohm (Balanced)
Scale Reference
Analog: +8/+6/+4/0 dBu
Digital: -20/-18/-9 dBFS
AES/EBU Input Termination
Balanced: 110 ohm
Unbalanced: 75 ohm
3G/HD/SD-SDI Input Termination
Unbalanced: 75 ohm
Rack Height
2RU (requires just 2 slots in standard 19.0" [48.3 cm] rack)
Power Output
RMS Left Side: 10W (14W Peak)
RMS Right Side: 10W (14W Peak)
RMS Center Woofer: 25W (35W Peak)
Power Connector
Standard External Power Cord (for standard US outlet)
Alternate Power Cables Available (sold separately)
Power Requirements
AC 100 - 240 V ±10%, 50/60 Hz
Power Consumption
60W
Dimensions
3.5 x 19.0 x 12.0" (8.9 x 48.3 x 30.5 cm)
Weight
22 lb (10 kg)
Track Page Views With
Auctiva's FREE Counter